Description
This meter features the HI-73127 replaceable electrode with a stainless steel round connector. This cartridge design has no pins which could bend or break. The protective cap features an internal cup that can be filled with storage solution to keep the pH sensor moist. Features Waterproof – designed to float if accidentally dropped in water Automatic Temperature Compensation – All readings are compensated for variations in temperature and temperature is displayed along with the pH reading. Stability indicator – Meter displays a tag that will disappear when the reading has achieved stability Hold button – Freezes reading on the display to allow recording of measurement BEPS (Battery Error Prevention System) – Meter will automatically shut off if there is not enough power to get an accurate measurement Battery % level at start up Low Battery Indicator Automatic Shut-Off – The meter can be set to automatically turn off after 8 minutes or 60 minutes to conserve battery life in the event that the meter is left on. The auto off feature can be disabled. pH Range -2.0 to 16.0 pH Resolution 0.1 pH pH Accuracy ±0.1pH Temperature Range -5.0 to 60.0°C Temp Resolution 0.1°C Temp Accuracy ±0.5°C Additional specifications pH Calibration Automatic, one or two point with two sets of standard buffers Temp compensation automatic Battery life & type 1.5V (4) approx. 300 hours of continuous use; auto off after 8 minutes of non-use Environment -5 to 50°C; RH max 100% Dimensions 163 x 40 x 26mm Weight 100 g Ordering information Supplied with HI-73127 pH electrode, electrode removal tool, protective cap, pH 4.01 buffer solution x 2 sachets, pH 7.01 buffer solution x 2 sachets, electrode cleaning solution sachet, electrode storage solution sachet, batteries, and instructions.
